Make sure to seal the top and bottom edges of all doors with a finish coat of paint or sealer to prevent moisture infiltration.
Door Sealing
read more
Doors
Padlock Picks
For a high level of security, select padlocks with pin-tumbler locking mechanisms, shackles of high-tech alloy steel to provide pull strength, and special weather-resistant plastic covers to stand up to the elements.
Drip Cap Flashing
Make sure to always install a drip cap flashing over the head casing of all doors and windows. A flashing will prevent water from penetrating the door or window frame.
Energy Incentives
Many utilities offer incentives to homeowners who make improvements that save energy. Contact your utility company to determine if you’re eligible for a low-interest loan or discount for replacing your windows and doors. Ask about energy-efficient insulating features such as argon gas between the panes of glass and a Low-E coating.
Installing a Bulkhead
Bulkheads usually come in kits. Lay out the pieces first and follow the directions step by step, and it should only take you four hours or so build. Before you secure all the bolts, make sure the doors close and latch properly. Then seal the base with mortar. Slope the edges to keep your bulkhead watertight and your basement dry.
Weather Stripping
Weather stripping can seal leaks around movable joints, such as windows or doors. You need to choose a type of weather stripping that will withstand the friction, weather, temperature changes, and wear and tear associated with its location.
Glazed Door Options
There are several options when choosing a glazed door. For maximum light, consider a door with a large glass area. For privacy and security, opt for one or two small sections of glass, or glazing that is decorative and obscures the view into your house. If there is a possibility of ultraviolet (UV) damage to floors, rugs and furniture, consider choosing a glazing that resists UV rays.
Sticky Locks
To loosen a sticking lock, put a little oil on the key. Put the key in the lock, and give it a few turns to loosen the hardware.
Pan Flashing
Pan flashing under doors and windows is an effective way of ensuring that no water is driven under the door or window.
Sticking Hinge
Treat a sticking hinge by rubbing pencil lead along the spine. Alternatively, smear a little light oil along the hinge with a cloth, working the hinge back and forth until it moves freely.
